Jobb i fokus
Vi söker dig som:
- Studerar på universitet eller gymnasium.
- Har fyllt 18 år.
- Bor i Stockholm, Göteborg, Malmö eller Lund.
Hitta lediga jobb via bransch
Sök personal via bransch
Senaste från våra bloggare
-
Jonny Jobbs
22:e Februari
Sommarjobb kommunen
EXJOBB-Modelling & simulation of PID-control for advanced 3Mhighspeed dyno
Publicerades: 30:e Augusti 2018 Sista ansökningsdagen: 9:e December 2018
Department: The Product development (PD) at GKN ePowertrain in Köping spans over six departments with expertise within project leading, simulation, noise-vibration and harness, prototyping, design, vehicle integration and physical testing. The product development drives the development of new products within the torque area for all-wheel drive cars. Currently, we are looking for a Thesis worker to the Physical test department
Background: At the Test department there are several different test rigs aimed to evaluate the performance of new and current PTUs and FDUs. Some of these rigs call for advanced PID-tuning to carry out the intended test in a correct way, and to a high quality.
One of the challenges faced in operating these test rigs, is to configure the test rig for a new test cycle. This is largely because of the iterative process that needs to be carried out to tune the PID to create a system that is stiff enough and responds appropriately. This is a rigorous, cumbersome and time-consuming process. Today, this process is carried out physically in the test rig.
Assignment description: The objective of this thesis will be to build a model/system that simulates/predicts the behavior of one of our 3M-test rigs for a given test cycle. Our aim by having such a model/system is that every new test cycle can be optimized prior setting it up in the test rig. This will save time and money, and optimize the work.
To succeed in the building the model/system one must understand the architecture of the PID controller of the test rig, and thoroughly investigate all the influencing factors of the rig response. This work will therefore call for close collaboration with engineers and technicians at the test department in GKN to in detail understand the rig functionality besides working with the building of the model in a suitable user interface.
Qualifications / Education: Mechanical Engineering, Mechatronic master, Engingeering Physics and Electrical Engineering or equalient.
Estimated time: 30hp/20weeks
GKN Driveline Köping AB är ett center of exellence för AWD-system (fyrhjulsdrift) på personbilsmarknaden. Det är ett modernt produktionsinriktat verkstadsföretag med toppmodern maskinpark och de anställda förser företagets globala kunder med marknadsledande produkter. Företaget har produktion och produktutveckling i Köping med totalt cirka 1000 personer. Framtidens utmaningar möts med kraft, uppfinningsrikedom och uthållighet.
Varaktighet 11 dagar - 3 månader
Löneform Gratifikation vid godkänt resultat på uppsats
Gratifikation vid godkänt resultat på uppsats
Gkn Driveline Köping AB
http://www.gkngroup.com/Yrkesområde:
Teknik / Ingenjör / DriftAnställning:
DeltidAntal platser:
1Sista ansökningsdag:
9:e December 2018Plats:
Köping, VästmanlandFler annonser från samma företag
EXJOBB - Industry 4.0 Big data analys på montering | Teknik / Ingenjör / Drift | Västmanland |
EXJOBB - Industry 4.0 Framtida montering | Teknik / Ingenjör / Drift | Västmanland |
EXJOBB - Industry 4.0 Utvärdering av maskinupplägget i... | Teknik / Ingenjör / Drift | Västmanland |
EXJOBB - Guidelines för materialhantering på montering | Teknik / Ingenjör / Drift | Västmanland |
EXJOBB - Visualisering av materialflöde i tillverkning | Teknik / Ingenjör / Drift | Västmanland |
EXJOBB - Traceability in single gear manufacturing | Teknik / Ingenjör / Drift | Västmanland |
EXJOBB-Simulering av bemanning för optimalt utnyttjande... | Teknik / Ingenjör / Drift | Västmanland |
Liknande jobb på jobbaextra
Nyutexaminerad ingenjör mot mjukvarutest | Teknik / Ingenjör / Drift | Västmanland |
0.12043905258179